The MD305 is designed for use in industrial environments. The hook-shaped jaws enable the user to pry into or hook onto cables (will accept 2 x 500 MCM) or even smaller bus bars. It is compatible with any AC Ammeter, multimeter, or other current measurement instruments with an input impedance lower than 5. It has excellent frequency and phase shift characteristics. Output termination is a double insulated 5 ft lead with safety banana plugs.

To achieve the stated accuracy, use the MD305 with an Ammeter having an accuracy of 0.75% or better.

Maximum Conductor Size	Cable 1.18″ (30mm), bus bar 2.48×0.19 (63 x 5mm), dual cable 0.98 (25mm)
Current Range	600AAC
Measurement Range	1 to 600AAC
Output Signal	1mAAC / AAC (600mAAC @ 600AAC)
Transformation Ratio	1000:1
Output	Double insulated 5ft (1.5m) lead with safety 4mm banana plugs
Accuracy 50/60Hz	2% @ 600A
Frequency Range	40Hz to 1KHz
Phase Shift	1
Load Impedance	5 max
Overload	700A for 10 min
Operating Temperature	-5 to +122F (-15 to +50C)
Storage Temperature	-40 to +185F (-40 to +85C)
Dimensions	2.6 x 7.68 x 1.34 (66 x 195 x 34mm)
Weight	14.82 oz (420g)
Pollution Degree	2
Rating	UL 94 V0
Ingress Protection	IP20
EMC	EN 50081-1 Class B, EN 50082-2, IEC 61000-4-2
Safety Compliance	EN 61010-2-32, 600V CAT III