The SR701 is a general purpose 1000 AACcurrent probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1 mA per amp measured in the jaw. The SR701 has jack output terminations that accept 4 mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift and wide frequency response are important.

Maximum Conductor Size	2.05 in (52 mm)
Current Range	1000 Arms AC
Measurement Range	1 mA to 1200 AAC
Output	(2) standard safety 4 mm banana jacks
Transformation Ratio	1000:1
Output Signal	1 mA/AAC (1 A @ 1000 A)
Accuracy 50/60Hz	0.3 % @ 1000 A
Frequency Range	30 Hz to 5 kHz
Phase Shift at 50Hz	0.7 @ 1000 A
Open Secondary Voltage	Limited to <25 V
Load Impedance	5 max
Overload	1200 A for 15 min ON, 30 min OFF
Dimensions (H x W x D)	(4.37 x 8.50 x 1.77) in (111 x 216 x 45) mm
Weight	1.21 lbs (550 g)
Operating Temperature	(14 to 122) F (-10 to 50)C
Storage Temperature	(-4 to +158) F (-20 to +70) C)
Operating Humidity	90 % RH
Pollution Degree	2
Ingress Protection (Ip)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600 V CAT III, EN/IEC 61010-032